Atendimento UtiliBox

Abrir ticket de suporte

Descreva o que precisa. O chamado ficará registrado e a equipe receberá uma notificação por e-mail.

Free Online Time Study Calculator — Standard Time, Barnes & Westinghouse

Stopwatch · Barnes · Westinghouse · Allowances T1–T4 · Line balancing

New here? Add stations, time the cycles (Barnes), rate the operator (Westinghouse) with allowances T1–T4 and find the line bottleneck.
Time study
New study
Step 1

Workstations

List the line operations in flow order. Each station gets its own readings, operator rating and allowances.

Step 2

Timing and sample size

Time (or type) the cycles. Barnes' formula tells you how many readings you need for the chosen confidence and accuracy.

⏱ Stopwatch
0.000 s
Recorded readings
No readings yet. Use the stopwatch above or "Paste text" to add many at once.
Step 3

Operator rating and allowances

The Westinghouse rating turns observed time into Normal Time; allowances T1–T4 turn it into Standard Time.

Rating factor = 1 + H + E = 1.0000
Σ T = 9% FT = 1.0900
Step 4

Line: takt, bottleneck and balancing

Compare the demand pace (takt) with the slowest station (bottleneck) and see the minimum number of stations.

Add stations and calculate to see the results here.

Time Study — online Standard Time calculator

Work out the required number of readings (Barnes formula), the Normal Time (Westinghouse rating), the Standard Time with allowances T1–T4 and the line bottleneck — with a built-in stopwatch and a ready-made report.


Study path

Follow the blocks in order: each one builds on the previous. The In short boxes are for quick review.

1 · Understand the method

2 · In practice

3 · Context

4 · Questions

Summary in 1 minute

  • Time repeated cycles and compute the mean (x̄) and standard deviation (s) of the readings.
  • The Barnes formula n′ = (z·s / (a·x̄))² tells you how many readings are enough; if n′ > N, take more.
  • Correct for pace with Westinghouse: NT = x̄ × (1 + skill + effort).
  • Add the allowances T1 (personal), T2 (basic fatigue), T3 (variable fatigue) and T4 (delay): ST = NT × (1 + ΣT/100).
  • On the line, the bottleneck is the station with the highest ST; it must stay below takt (available time ÷ demand).
  • A CV above 15% means an unstable process: stabilise the method before fixing the Standard Time.

Formula cheat sheet

ConceptFormulaReading
Required readings (Barnes)n′=(z sa xˉ)2n'=\left(\dfrac{z\,s}{a\,\bar{x}}\right)^2round up
Normal TimeNT=xˉ (1+H+E)NT=\bar{x}\,(1+H+E)Westinghouse rating
Allowance factorAF=1+T1+T2+T3+T4100AF=1+\dfrac{T_1+T_2+T_3+T_4}{100}% of Normal Time
Standard TimeST=NT×AFST=NT\times AFsustainable time
Standard output60/STmin60/ST_{min}units per hour
Takt timeavailable timedemand\dfrac{available\ time}{demand}customer pace
Minimum stations⌈∑ST/takt⌉\left\lceil \sum ST / takt \right\rceilbalancing floor
Line efficiency∑STN×STbottleneck\dfrac{\sum ST}{N \times ST_{bottleneck}}idle share = 1 − efficiency

↑ Back to the study path


What is a time study?

A time study (also called stopwatch time study or work measurement) is the most widely used technique in industrial engineering to set the Standard Time of an operation. Pioneered by Frederick Winslow Taylor and systematised by Ralph M. Barnes, it consists of timing repeated cycles of a task and treating the data statistically to find how long a qualified operator, working at a normal pace, needs to perform it — unavoidable breaks included.

Direct applications:

  • Production planning and control
  • Balancing assembly lines and manufacturing cells
  • Standard labour cost
  • Sizing crews and shifts
  • Basis for incentive schemes and productivity targets
  • Finding bottlenecks and waste (lean manufacturing)

↑ Back to the study path


Barnes formula for the number of readings (n′)

📌 In short — The more variation (s) and the tighter the accuracy (small a), the more readings. Doubling accuracy (±10% → ±5%) quadruples n′. · Pitfall: with fewer than 5 readings s is unstable — run the pilot sample before trusting n′.

Before computing the Standard Time you must make sure the sample is statistically sufficient. The general form, based on the normal distribution, is:

n′=(z⋅sa⋅xˉ)2n' = \left(\frac{z \cdot s}{a \cdot \bar{x}}\right)^2

Where:

  • z = normal score for the confidence level (e.g. z = 1.96 for 95%)
  • s = sample standard deviation of the readings
  • a = desired accuracy as a decimal (e.g. 0.05 for ±5%)
  • x̄ = arithmetic mean of the readings

Always round the result up.

Decision rule:

  • If n′ ≤ N (readings already taken), the study is enough; compute the Standard Time.
  • If n′ > N, take n′ − N more readings and recalculate.

Pilot sample

Take at least 5 readings before applying the formula — with fewer, the standard deviation is unstable and n′ can come out artificially high or low.

Worked example

Manual welding station, 6 readings in seconds: 45, 47, 44, 50, 46, 48.

ParameterValue
N6
Mean46.67 s
Standard deviation2.16 s
Confidence95% (z = 1.96)
Accuracy±5% (a = 0.05)
n′4 (3.29 rounded up)

Since n′ = 4 ≤ N = 6, the 6 readings already taken are enough.

Note: Barnes’ shortcut formula, n′=(40N∑x2−(∑x)2∑x)2n' = \left(\frac{40\sqrt{N\sum x^2 - (\sum x)^2}}{\sum x}\right)^2, is fixed at 95% confidence and ±5% accuracy. This calculator uses the general form, which accepts any combination of confidence and accuracy.

↑ Back to the study path


Westinghouse performance rating system

📌 In short — An above-average operator (positive skill and effort) gives a NT higher than observed; below average, lower. NT is the time of an average operator. · Pitfall: the rating factor adds the adjustments (1 + skill + effort), it does not multiply them.

The Westinghouse system rates the observed operator’s skill and effort against normal pace (100%). Both adjustments are added to a factor of 1.

Skill

ClassAdjustment
Superskill (A1 / A2)+15% / +13%
Excellent (B1 / B2)+11% / +8%
Good (C1 / C2)+6% / +3%
Average (D)0%
Fair (E1 / E2)−5% / −10%
Poor (F1 / F2)−16% / −22%

Effort

ClassAdjustment
Excessive (A1 / A2)+13% / +12%
Excellent (B1 / B2)+10% / +8%
Good (C1 / C2)+5% / +2%
Average (D)0%
Fair (E1 / E2)−4% / −8%
Poor (F1 / F2)−12% / −17%

NT=xˉ×(1+vskill+veffort)NT = \bar{x} \times (1 + v_{skill} + v_{effort})

The full Westinghouse system also rates conditions and consistency; this calculator uses skill and effort, the form most often taught and used in practice.

↑ Back to the study path


Allowances — T1, T2, T3, T4

📌 In short — T1 personal (≈5%), T2 fatigue from posture and load, T3 mental/environment/short-cycle fatigue, T4 delays beyond the operator’s control. AF = 1 + ΣT/100. · Pitfall: do not count posture in T3 — it is already in T2.

Allowances cover the unavoidable interruptions of a working day and are expressed as % of Normal Time:

AllowanceWhat it coversTypical range
T1 — PersonalPhysiological needs, drinking water5% (ILO)
T2 — Basic fatiguePhysical tiredness (posture and load)8% and up (posture × kg table)
T3 — Variable fatigueMental/sensory demands + environment (noise, dust, fumes, heat) + short cycles0–20%
T4 — Unavoidable delayWaiting for machine, material or instructions0–10%

Allowance factor (AF) — additive method

AF=1+T1+T2+T3+T4100AF = 1 + \frac{T_1 + T_2 + T_3 + T_4}{100}

ST=NT×AFST = NT \times AF

T2 — Physical effort table (Barnes)

T2 crosses the working posture (standing, seated, squatting…) with the load handled in kg. In step 3, the Estimate from posture button opens this table interactively — standing with up to 1 kg, for instance, gives 8%.

T3 — Mental and sensory demands (ILO)

Working posture and physical effort are already in T2 (posture × kg table). This block covers only mental and sensory demands.

FactorAllowance
Fine visual attention (small detail)+2%
Very fine visual attention (precision)+5%
Moderate mental concentration+1%
High mental concentration+4%
Very high / critical concentration+8%
Medium monotony+1%
High monotony+4%
Tedious work+2%
Very tedious work+5%
Emotional strain / pressure+3%

T3 — Environmental factors

FactorAllowance
Intermittent noise+2%
Constant noise+4%
Constant, very loud noise+5%
Dust+9%
Fumes+5%
Lighting below recommended+2%
Lighting well below recommended+5%
Pit or trench+5%
Scaffolding (per level)+2%
High voltage+2%
Moderate heat and humidity+5%
Extreme heat and humidity+10%

T3 — Cycle length (monotony)

Cycle lengthAllowance
0.01 – 0.05 min+10.0%
0.06 – 0.10 min+7.8%
0.11 – 0.25 min+5.4%
0.26 – 0.50 min+3.6%
0.51 – 1.00 min+2.1%
1.01 – 4.00 min+1.5%
4.01 – 8.00 min+1.0%
8.01 – 12.00 min+0.6%
12.01 – 16.00 min+0.3%
16.01+ min+0.1%

↑ Back to the study path


Complete time study example

Scenario: manual packing station, 0.8 kg product, operator standing.

Step 1 — Readings (s): 22, 25, 23, 24, 27, 23, 26, 24, 25, 24

Step 2 — Is the sample enough? Mean = 24.3 s and s = 1.494 s, so

n′=(1.96×1.4940.05×24.3)2=5.81⇒6n' = \left(\frac{1.96 \times 1.494}{0.05 \times 24.3}\right)^2 = 5.81 \Rightarrow 6

Since 10 readings ≥ 6, the sample is enough ✔

Step 3 — Westinghouse: skill C1 (+6%), effort D (0%) → rating factor = 1.06

NT=24.3×1.06=25.76 sNT = 24.3 \times 1.06 = 25.76 \text{ s}

Step 4 — Allowances: T1 = 5%, T2 = 8% (standing, 0.8 kg), T3 = 2% (intermittent noise), T4 = 0% → AF = 1.15

ST=25.76×1.15=29.62 s=0.494 min/unitST = 25.76 \times 1.15 = 29.62 \text{ s} = 0.494 \text{ min/unit}

Standard output: 60 / 0.494 ≈ 121 units/hour

↑ Back to the study path


Line balancing and takt time

Line balancing spreads the work across stations so that none exceeds the takt time — the pace set by customer demand.

Takt=Available timeDemandTakt = \frac{Available\ time}{Demand}

Nmin=⌈∑STiTakt⌉N_{min} = \left\lceil \frac{\sum ST_i}{Takt} \right\rceil

Efficiency=∑STiN×STbottleneck×100%Efficiency = \frac{\sum ST_i}{N \times ST_{bottleneck}} \times 100\%

The bottleneck is the station with the highest Standard Time; it sets the line capacity (60 / bottleneck ST, in units per hour). Step 4 of this calculator finds the bottleneck automatically and computes line efficiency and maximum output.

In the ready-made example: with one 8-hour shift (480 min) and a demand of 800 units/day, takt is 480 / 800 = 0.6 min = 36 s. The bottleneck is Packing (ST = 29.62 s), below takt — the line meets demand.

↑ Back to the study path


How to use this time study calculator

The tool walks you through the four steps of a complete time study:

StepWhat to do
1 · StationsList the workstations (operations) of the line, in flow order
2 · TimingTime or type the readings; the calculator computes n′ (Barnes) and tells you whether the study is already enough
3 · Rating & allowancesSet skill and effort (Westinghouse) and allowances T1–T4 to get Normal and Standard Time
4 · LineEnter demand, shifts and hours to get takt time, bottleneck and line efficiency

Tip: every field recalculates instantly. The ready-made example (⋯ menu → Load example) is the same one used in the calculations on this page.

↑ Back to the study path


Time study vs other methods

MethodAccuracyCostWhen to use
Stopwatch study (Barnes)HighMediumExisting repetitive operations
MTM / MOSTVery highHighNew station, before production
Work samplingMediumLowIrregular activities
Historical estimateLowVery lowEarly planning

For decisions around capacity and queues, see the queueing theory simulator and the AHP decision tool.

↑ Back to the study path


Gilbreth’s 17 Therbligs

Frank and Lillian Gilbreth broke human motion down into 17 basic elements called Therbligs, used to remove unproductive motions (the full table is under the tool’s Tables button):

CategoryTherbligs
ProductiveGrasp, Transport loaded, Position, Use, Assemble, Disassemble
Semi-productiveSearch, Find, Select, Inspect, Pre-position, Release load
UnproductiveHold, Transport empty, Unavoidable delay, Avoidable delay, Rest

↑ Back to the study path


Frequently asked questions

What is the difference between Observed, Normal and Standard Time? Observed Time (x̄) is the plain mean of the readings. Normal Time (NT) corrects it for pace with the Westinghouse rating. Standard Time (ST) adds allowances T1–T4. Only ST represents the sustainable time of an average operator under normal conditions.

How many readings should the pilot study have? At least 5, ideally 10. With fewer than 5 the sample standard deviation is unstable. If the CV is above 20%, start with 10 to 15 readings.

Why is n′ so high? A high n′ means high variability (high CV). Common causes: a method that is not standardised, interruptions, mixed operators, anomalies. Standardise the method and repeat the study.

Additive or multiplicative allowances? The additive method (ST = NT × (1 + ΣT/100)) is Barnes’ standard and the most common in industry, with allowances as % of Normal Time. The multiplicative method (ST = NT / (1 − ΣT/100)) treats allowances as % of the working day and gives a higher ST — the gap grows once ΣT exceeds 20%.

Does Standard Time include setup? No. Cycle ST covers only the repetitive operation. Setup is measured separately: total ST = cycle ST + (setup / batch size).

What if the CV is high? A CV above 15% is a warning sign. Look into materials, interruptions, fatigue over the shift and layout. Stabilise the process before fixing the final Standard Time.

How do I save my study? In the ⋯ menu, use Export study (JSON) to save every station and reading and Import study (JSON) to open it again. The Report button builds a formatted document and Download PDF saves it straight to a file.

Does this replace professional work-measurement software? For simple to moderate studies (up to ~20 stations), yes. For video analysis, ERP integration or ISO certification, use specialised software. This tool is ideal for learning, university projects and quick shop-floor analyses.

What is the minimum acceptable accuracy? The ILO and Barnes recommend ±5% at 95% confidence as the industrial standard. For high-cost operations use ±2% at 99%; for early planning, ±10% at 90% may be enough.

Can I use it for non-repetitive work? The Barnes formula suits short-to-medium cycles with high repetition. For irregular work (maintenance, logistics), use work sampling instead.

↑ Back to the study path